NETGEAR WG302 - 802.11g ProSafe Wireless Access Point Reference Manual page 33

Table 3-1. Basic Wireless Security Options
Field
Network
Authentication
Encryption Strength You can select the following data encryption options:
Security Encryption
(WEP) Keys
Enable Wireless
Security
Separator
Basic Installation and Configuration
Reference Manual for the WG302 802.11g ProSafe Wireless Access Point
Description
You can select the following network authentication options:
• Open System: the WG302 does not perform any authentication. However, if the
802.1x option is configured, authentication of connections can be performed by a
RADIUS server.
• Shared: this is for shared key authentication. The SSID and data are encrypted.
• Disabled
• 64- 128- or 152-bit WEP
With Open System Authentication and 64- 128- or 152-bit WEP Data Encryption,
the WG302 does perform data encryption but does not perform any
authentication.
If WEP is enabled, you can manually or automatically program the four data
encryption keys. These values must be identical on all PCs and access points in
your network (key 1 must be the same for all, key 2 must be the same for all, etc.)
There are two methods for creating WEP encryption keys:
• Passphrase.
These characters are case sensitive.
Enter a word or group of printable characters in the Passphrase box and click the
Generate button.
Note: Not all wireless adapters support passphrase key generation.
• Manual.
These values are not case sensitive.
64-bit WEP: enter 10 hexadecimal digits (any combination of 0-9, a-f, or A-F).
128-bit WEP: enter 26 hexadecimal digits (any combination of 0-9, a-f, or A-F).
152-bit WEP: enter 32 hexadecimal digits (any combination of 0-9, a-f, or A-F).
The associated wireless clients will not be able to communicate with each other if
this feature is enabled. The default setting is Disable.
December 2003
3-12