Playing Back Still Images From A Memory Card - Canon 3249B001 Instruction Manual

Playing Back Still Images from a Memory Card

1. Turn the dial to
/ (card/tape) switch to
2. Press the + or – button to move
between images.
Still images not recorded with this camcorder, uploaded from a computer, edited on a computer
and still images whose file names have been changed, may not be played back correctly.
Observe the following precautions while the card access display appears on the screen or the
CARD access indicator is on or flashing. Failing to do so may result in permanent data loss.
- Do not remove the memory card.
- Do not change the position of the
- Do not turn off the camcorder, remove the battery pack or disconnect the power supply.
Slideshow
Press the SLIDESHOW button.
• Still images are played back one after another.
• Press the button again to stop the slideshow.
Index Screen
1. Move the zoom lever toward W.
Up to 6 still images appear.
2. Turn the SELECT dial to select an image.
• Move to the still image you wish to view.
• You can switch between index pages by pressing the
3. Move the zoom lever toward T or press the SET button.
The selected still image is displayed.
and set the
.
/ (card/tape) switch or the dial.
+ or – button.
123