Table of Contents
Advertisement
Preparing the Power Supply
Preparations
Charging the Battery Pack
Disconnect the DC coupler from the compact power adapter before charging. Remove the terminal
cover of the battery pack.
1. Connect the power cord to the compact
power adapter.
2. Plug the power cord into a power outlet.
3. Attach the battery pack to the compact
power adapter.
• Press lightly and slide the battery pack in the
direction of the arrow until it clicks.
• The charge indicator starts flashing. The indicator
will stay on when the charging is completed.
4. When the charging is completed, remove
the battery pack from the compact power
adapter.
5. Unplug the power cord from the power outlet and disconnect it from the compact
power adapter.
Attaching the Battery Pack
1. Turn the
dial to OFF.
2. Attach the battery pack to the camcorder.
Align the battery pack with the guideline and press
lightly. Slide the battery pack up, in the direction of
the arrow, until it clicks.
3. Remove the battery pack after use.
Holding the BATT. RELEASE button pressed down,
slide the battery pack down to remove it.
Charge indicator
Guideline
BATT. RELEASE button
15
Advertisement
Table of Contents
