Table of Contents
Advertisement
Loading/Removing a Cassette
Use only videocassettes marked with the
videocassettes designed for HDV recording.
1. Slide the
EJECT switch to open the
cassette compartment cover.
The cassette compartment opens automatically.
2. Load/remove the cassette.
• Insert the cassette straight, fully into the
compartment with the window facing out.
• Remove the cassette by pulling it straight out.
3. Close the cassette compartment cover.
Press the
mark on the cassette compartment
cover.
Do not interfere with the cassette compartment while it is opening or closing automatically.
Be careful not to get your fingers caught in the cassette compartment.
If the camcorder is connected to a power source, cassettes can be loaded/removed even if the
dial is set to OFF.
logo. For recording in HDV we recommend you use
29
Advertisement
Table of Contents
