Table of Contents
Advertisement
Drive Mode
Drive mode
Continuous Shooting
High-Speed Continuous
AEB
(Auto Exposure Bracketing)
Single
Changing the Drive Mode
1. Set the
dial to a recording program
other than
and move the
tape) switch to
2. Press the DRIVE MODE button to switch
between the drive modes.
Pressing the button will cycle through the drive
modes. The icon of the selected drive mode will
appear on the screen.
Continuous Shooting/High-Speed Continuous Shooting
Press and hold the PHOTO button.
A series of still images will be recorded as long as you hold the PHOTO button pressed down.
Maximum number of continuous shots:
- These figures are approximate and vary depending on the recording conditions and subject.
- Sufficient space on the memory card is required. Continuous shooting will stop when the card is
full.
Auto Exposure Bracketing
Press the PHOTO button.
Three still images in different exposures are recorded on the memory card. Make sure that there is sufficient
space on the memory card.
120
Captures a quick series of still images while you hold the PHOTO button pressed down.
For the number of shots per second, refer to the table below.
The camcorder records a still image in three different exposures (dark, normal, light in
1/2 EV steps).
Records a single still image when you press the PHOTO button.
/
(card/
.
Shots per second
Normal speed
2.5 images
Use
Maximum number of continuous
High speed
4.1 images
shots
60 images
Advertisement
Table of Contents
