Table of Contents
Advertisement
Setting the Date and Time
Language
: English
Install
GB
User Set
Auto Power Off
: Off
Screen Messages
: On
Clock Set
Time
Date
Year
12 : 00
1 / JAN / 2004 THU
Setting the Menu Language
Language
: English
Install
User Set
Auto Power Off
: Off
Screen Messages
: On
Language Set
English
Français
Deutsch
Español
Italiano
Nederlands
18
Your DVD-VCR contains a 24-hour clock and calendar used to:
Automatically stop programme recording
Preset your DVD-VCR to record a programme
automatically
You must set the date and time when:
You purchase the DVD-VCR
Do not forget to reset the time when you change
clocks from winter to summer time and vice versa.
1
After pressing the MENU, press the OK or ❿ .
Result:
The Setup menu is displayed.
2
Press the corresponding
,
buttons to select the
"
❷
option.
3
Press the OK or ❿ to select this option.
Result:
The
Clock Set
menu is displayed.
4
Press ➛ or ❿ to select the hour, minutes, day, month and year.
Result:
The option selected highlight.
5
Press the
or
buttons to increase or decrease the value.
"
❷
Result:
The day of the week is displayed automatically.
You can hold the
or
buttons down to scroll more
"
❷
quickly through the values.
6
Press the
or
to select On/Off, if you select Auto Clock.
"
❷
Result:
The selected On/Off is displayed.
7
On completion, press RETURN three times to exit the menu.
1
Open "MENU"
After pressing the MENU, press the OK or ❿ .
2
Select "Language"
Use the
or
buttons to highlight "Language," then press the
"
❷
OK or ❿ .
3
Set menu Language
Place the selection arrow next to your desired Language, then
press the OK button.
4
On completion, press RETURN twice to exit the menu.
Presetting the Stations Automatically
You do not need to preset the stations if you have already
set them automatically (see Plug & Auto Set Up on page 13).
Your DVD-VCR contains a built-in tuner used to receive television
broadcasts.
You must preset the stations received through the tuner. This can
be done:
Plug & Auto Set up (see page 13)
Automatically
Manually (see page 20)
You can store up to 80 stations.
Clock
1
After pressing the MENU, press the OK or ❿ .
Result:
The Setup menu is displayed.
2
Press the corresponding
option.
3
Press the OK or ❿ to select this option.
Result:
The
Install
4
Press the corresponding
Setup
is selected.
And then press the OK or ❿ to select this option.
Result:
A message appears, indicating that any channels
already preset on your VCR will be deleted.
5
Press OK to start the auto scanning.
Result:
The
television screen.
The first frequency band is scanned and the first
station found is displayed and stored.
The DVD-VCR then searches for the second
station and so on.
When the automatic scanning procedure has
finished, the DVD-VCR switches automatically to
programme 1.
The number of stations automatically stored by the DVD-
VCR depends on the number of stations that it has found.
6
If you wish to cancel the auto scanning before the end, press the
MENU button to exit the menu.
Once the auto scanning procedure has finished,
some stations may have been stored more than
once; select the stations with the best reception and
delete the ones no longer required (see page 21).
,
buttons to select the
Install
"
❷
menu is displayed.
or
buttons, until the
Auto
"
❷
indication highlight on the
Please Wait
VCR
Language
: English
Install
GB
User Set
Auto Power Off
: Off
Screen Messages
: On
Install
Auto Setup
Manual Setup
TV System
: G
VCR Output CH
: CH 36
Auto Setup
Your data will be lost
Press OK to continue
Menu
to exit
Auto Setup
Please Wait
15%
19
Advertisement
Table of Contents
