Table of Contents
Advertisement
VCR
GB
USER SET
RETURN
COLOUR SYSTEM
NICAM
IPC
AUTO POWER OFF
RETURN
VCR
USER SET
RETURN
COLOUR SYSTEM
NICAM
IPC
AUTO POWER OFF
RETURN
Selecting the Colour Mode
MAIN MENU
➛ ❿
ENTER
❷
USER SET
AUTO
:AUTO
PAL
:ON
MESECAM
:ON
B/W
:OFF
➛ ❿
❷
NICAM
MAIN MENU
➛ ❿
ENTER
❷
USER SET
:AUTO
ON
:ON
OFF
:ON
:OFF
➛ ❿
❷
24
Before recording or playing back a cassette, you can select the
required system standard.
Otherwise, the system automatically selects the reception standard
when you select AUTO.
When playing back a cassette, the standard is
automatically selected by the DVD-VCR.
When you playback an NTSC-recorded tape on this DVD-
VCR make a setting on the colour system according to your
TV. If your TV is a PAL system only TV, set NTPB.
If your TV is Multi System TV (NTSC 4.43 compatible), set
NT4.43 and you can record NT4.43.
1
Press MENU on the remote control.
Result:
The MAIN MENU is displayed.
2
Press the corresponding
USER SET
option.
3
Press the ENTER button to select this option.
Result:
The
USER SET
4
Press the corresponding
on the
COLOUR SYSTEM
5
Press the ❿ button to select
AUTO When playing back a cassette, the system standard is
automatically selected by the DVD-VCR.
B/W
Black and White
6
On completion, press RETURN twice to exit the menu.
NICAM programmes are divided into 3 types. NICAM Stereo,
NICAM Mono and Bilingual (transmission in another language).
NICAM programmes are always accompanied by a standard mono
sound broadcast and you can select the desired sound.
Please refer to page 30.
1
Press MENU on the remote control.
Result:
The MAIN MENU is displayed.
2
Press the corresponding
USER SET
option.
3
Press the ENTER button to select this option.
Result:
The
USER SET
4
Press the corresponding
placed on the
NICAM
5
To...
Mono mode
NICAM mode
6
On completion, press RETURN twice to exit the menu.
or ➛, ❿ buttons to select the
,
❷
menu is displayed.
or
buttons, until the cursor is placed
❷
option.
AUTO
PAL
MESECAM
or ➛, ❿ buttons to select the
,
❷
menu is displayed.
or
buttons, until the cursor is
❷
option.
Press ➛ or ❿, until...
OFF
is displayed.
OFF: Only set at this position to record the
standard mono sound during a
NICAM broadcast if the stereo sound
is distorted due to inferior reception
conditions.
ON
is displayed.
ON: Normally set at this position.
B/W
.
Advertisement
Table of Contents
