Table of Contents
Advertisement
VCR
GB
1/JAN TUE
PR DAY
START STOP
1 SA 9 12:00 12:50SP
-- ---- --:-- --:----
-- ---- --:-- --:----
-- ---- --:-- --:----
-- ---- --:-- --:----
-- ---- --:-- --:----
➛❿
❷
RETURN
STANDBY/ON
Using the Timer Programming Feature
12:09
❿
SET:
DELETE:CLEAR
TV
STANDBY/ON
30
The Timer Programming feature allows you to preset the DVD-VCR
to record a programme up to one month before that programme is
to be broadcast. Up to six programmes can be preset.
Before presetting a recording, check that the date and
time are correct.
1
Press TIMER on the remote control.
Result:
The timer programme is displayed.
Press ❿ to select the input source.
2
3
Select the required station by pressing the
4
Press ❿ to select the recording day.
5
Select the required day by pressing the
Press ❿ to select the recording start time.
6
7
Select the required hour value by pressing the
8
Press ❿ to select the minutes.
9
Select the required minute value by pressing the
10
Press ❿ to select the recording stop time.
11
Select the required recording stop time by pressing the
buttons, following the same procedure as when selecting the
recording start time.
12
Press ❿ to select the recording speed.
13
Press the
or
❷
(Long Play),
AUTO
14
When you have finished, press the RETURN button.
15
Press the STANDBY/ON button to activate the timer.
Result:
Before starting recording, the DVD-VCR compares the
timer duration with the remaining time on the cassette.
Auto Tape Speed Select. The DVD-VCR's "Auto Tape
Speed Select" function compares the duration of the timer
recording to the actual recording time remaining on the
tape loaded. If there is insufficient tape to complete a
timer recording in AUTO mode, the DVD-VCR
automatically switches to LP mode to record the whole
programme.
,
❷
or
❷
buttons to select the
SP
(Standard Play),
(Auto Tape Speed Select) recording speeds.
buttons.
buttons.
or
buttons.
❷
or
buttons.
❷
or
❷
LP
Advertisement
Table of Contents
