Setting Up Your Dvd-Vcr - Samsung CHT-500 Instruction Manual

SETTING UP YOUR DVD-VCR

Basic TV Tuner Operations
The following buttons are used when watching television via the
DVD-VCR's built-in TV tuner.
1 TV/VCR Button
Press to switch between your TV's tuner and the VCR's internal
tuner.
2 PROG
Press to change to the next or previous channel.
3 0-9 Buttons
Press to select channels directly.
4 INFO.
Press to display the channel you are watching.
• Also works in DVD and VCR mode.
Copying from DVD to VCR
The DVD-VCR allows you to copy the contents of a DVD to a
VHS tape with a press of the COPY button.
If the DVD you are attempting to copy is copy protected, you will not
be able to copy the disc. It is not permitted to copy Macrovision®
encoded DVDs.
1 INSERT DISC
Insert the disc you wish to copy in the DVD deck and close the
drawer.
2 Insert VHS Tape
Insert a blank VHS videotape into the VCR deck.
3 Copy the DVD to VHS Tape
Press the COPY button on the DVD-VCR front panel.
• The DVD will go into Play mode and the VCR will go into Record
mode.
4 Stop the Copy Process
When the DVD is finished playing, press the VCR button on the
remote control and then press the STOP button to end the copy.
• You must stop the Copy process manually when the DVD movie
ends or the DVD may replay and record over and over again.
/ Button
Selecting the Cassette Type
If you wish to use the tape counter to display the time remaining
on a cassette, you must indicate the type of cassette inserted.
1 After pressing the MENU press the corresponding
VCR option.
2 Press the OK or ❿ buttons to select this option.
Result: The VCR Setup menu is displayed.
3 Press the corresponding or buttons, until the Tape Select option is
❷
selected.
4 Press the OK or ❿ buttons as many times as required, until the correct
cassette length is displayed.
E180 E240
E 300 E260
5 Press RETURN twice to exit the menu.
Repeat Play
You can set repeat play to repeat the tape continuously from
beginning to end.
1 After pressing the MENU, press the corresponding
the VCR option.
2 Press the OK or ❿ buttons to select this option.
Result: The VCR Setup menu is displayed.
3 Press the corresponding or buttons, until the Repeat Play option is
❷
selected.
4 To... Press OK or
Repeat play On is displayed.
Do not wish to repeat play Off is displayed.
5 On completion, press RETURN twice to exit the menu.
buttons to select the
,
❷
buttons to select
,
❷
❿ , until...
6