Conventional Zones; Transmitting; Receiving; Quiet Talk (Qt)/ Digital Quiet Talk (Dqt) - Kenwood TK-7180 Instruction Manual

T
RANSMITTING
1 Select the desired zone and channel using the Zone and CH/GID keys.
2 Press the key programmed as Monitor or Squelch Off to check whether or
not the channel is free.
• If the channel is busy, wait until it becomes free.
3 Press the PTT switch and speak into the microphone. Release the PTT
switch to receive.
• For best sound quality at the receiving station, hold the microphone approximately
1.5 inches (3 ~ 4 cm) from your mouth.
R
ECEIVING
1 Select the desired zone and channel using the Zone and CH/GID keys.
• Alternatively, you can turn the Scan function on if desired.
2 When you hear a caller's voice, readjust the volume as necessary, using the
Volume keys.
Q T (QT)/ D
UIET ALK
Your dealer may have programmed QT or DQT signaling on your transceiver
channels. A QT tone/ DQT code is a sub-audible tone/code which allows you to
ignore (not hear) calls from other parties who are using the same channel.
When a channel is set up with a QT tone or DQT code, squelch will only open
when a call containing a matching tone or code is received. Likewise, signals
that you transmit will only be heard by parties whose QT/ DQT signaling matches
your transceiver.
If a call containing a different tone or code is made on the same channel you are
using, squelch will not open and you will not hear the call. This allows you to
ignore (not hear) these calls. Although it may seem like you have your own
private channel while using QT/ DQT, other parties can still hear your calls if they
set up their transceiver with the same tone or code.
12

CONVENTIONAL ZONES

Q T (DQT)
IGITAL UIET ALK