Kenwood TK-7180 Service Manual Addendum

VHF/UHF FM TRANSCEIVER
TK-7180/8180
SERVICE MANUAL
ADDENDUM
This addendum adds the information on
the transceiver and external speakers
installations (KES-3 and KES-5).
1. External Speaker (Option)
1-1. KES-3
The KES-3 is an external speaker for the 3.5-mm-diameter
speaker jack.
■ Connection Procedure
1. Connect the KES-3 to the 3.5-mm-diameter speaker jack
on the rear of the transceiver.
Fig. 1
Microphone
(T91-0639-05)
Key top
(K29-9312-31)
INSTALLATION
1-2. KES-5
External speaker KES-5 can be installed for KAP-2. If KES-
5 is installed, it can be set by changing the CN1 short pin from
pins 4 and 5 to pins 5 and 6 on the KAP-2. Refer to the IN-
STALLATION (page 8) of the TK-7180 service manual (B51-
8691-00) and the TK-8180 original service manual (B51-8692-
00) for the detailed instructions how to install the KAP-2 to
the transceiver.
KAP-2 CN1 Connect
© 2004-12 PRINTED IN JAPAN
B51-8712-00 ( N ) 1007
Cabinet
(A01-2194-11)
Panel assy
(A62-1094-23)
Set Up
4-5 INT. SP or KES-3
5-6 KES-5