Conventional Operation; System Scan - Kenwood TK-780 Instruction Manual

m@ Receiving a Telephone Call
1 Select the desired system and group using the System and Group keys.
(If the Scan function has been programmed, you can switch it ON or OFF
as desired.)
e Aringing tone will sound when a call is received.
2 Press and hold the PTT switch to speak, and release it to listen.
e Only one person can speak at a time.
3 To end the call, press the # key or the key programmed as Tel
Disconnect.
CONVENTIONAL OPERATION
m@ Transmitting
Note: Before transmitting, monitor the channel to make sure it is not already in use. If the selected
group is programmed with QT (Quiet Talk) or DQT (Digital Quiet Talk), remove the microphone from
the hook to disable QT or DQT, then listen to the channel to make sure nobody is talking on it. If the
selected group is not programmed with QT or DQT, simply listen to the channel to make sure nobody
is talking on it. In this case, you need not remove the microphone from the hook.
3 When your conversation is finished, return the microphone to its hanger.
m@ Receiving
SYSTEM SCAN