Store And Send; Tore And End; Autodial - Kenwood TK-7180 Instruction Manual

S S
TORE AND END
Store and send allows you to make DTMF calls without the need for a DTMF keypad.
1 Press the key programmed as Autodial.
• "CODE" appears on the display.
2 Press the and
• Alternatively, you can enter the digits by using an optional DTMF keypad.
3 Press the C> key to accept the entered digit and move to the next digit.
• Press the A or DTMF # key to delete an incorrect character. Press and hold the A
or DTMF # key to delete all entered characters.
• You can enter up to 30 digits.
4 Press the PTT switch to make the call after the number is entered.
A
UTODIAL
Autodial allows you to store 32 names (up to 12 characters per name) and DTMF
numbers (up to 16 digits per number).
■ S
DTMF N
TORING
1 Press the key programmed as Autodial Programming.
• The first entry in the Autodial list appears on the display.
2 Press the <B and C> keys or the appropriate DTMF key to select your
desired Autodial list number (01 ~ 32).
• If programmed by your dealer, you can also use the
• "NAME" appears on the display after selecting a number.
3 Enter the desired name using the
keypad. Select a character, then press the C> key to confirm the
character and move the cursor to the right. Repeat this operation until the
complete name is entered, then press the S key to confirm the entry.
• Press the A or DTMF # key to delete an incorrect character. Press and hold the
A or DTMF # key to delete all entered characters.
• "CODE" appears on the display after confirming the entered name.
4 Enter the desired number using the
keypad. When using the keypad, simply enter the desired number,
followed by the S key to confirm the entry. When using the
cycle through the digits to select a digit, then press the C> key to confirm
the digit and move the cursor to the right. Repeat this operation until the
complete number is entered, then press the S key to confirm the entry.
• Press the A or DTMF # key to delete an incorrect character. Press and hold the
A or DTMF # key to delete all entered characters.
• "STORE" appears on the display after confirming the entered number.
5 Press the S or DTMF
Autodial list.
• Press the A or DTMF # key to cancel the entry.
• If you are overwriting a previous entry, "OverWrt" (TK-X180/ TK-X180H) or
"OVERWRT" (TK-X182/ TK-X182H) appears on the display. Press the S or
DTMF
20
keys to select a digit.
UMBERS
key to store the entered name and number in the
key to overwrite the entry, or press the A or DTMF # key to cancel.
and
and keys or the optional DTMF
and keys or the optional DTMF
keys.
and keys,