Table of Contents
Advertisement
Collective presetting of stations
Remote control unit only
1 Select the tuner input.
TUNER/BAND
2 Press the "ENTER" key for more than 2 sec-
onds
Channel space setting
The space between radio channels has been set to the one that prevails in the area to which the system is shipped.
However, if the current channel space setting does not match the setting in the area where the system is to be
used, for instance when you move from area 1 or area 2 shown in the following table or vice versa, proper recep-
tion of AM/FM broadcasts cannot be expected. In this case, change the channel space setting in accordance with
your area by referring to the following table.
Main unit only
1 Select the tuner input.
2 Press the "stop 7" key for more than 2sec-
onds.
ENTER
Receiving broadcast station
FM
÷ A maximum of 40 stations of the band presently
being received will be preset.
÷ When there are many stations and the intended
station has not been preset, please also use
"One-by-one presetting (Manual preset)".
Each press the "stop 7" key for more than 2 sec-
onds switches the modes as follows.
1 FM 50 k
2 FM 100 k
÷ At FM 50 kHz, the corresponding AM frequency is
9 kHz.
At FM 100 kHz, the corresponding AM frequency
is 10 kHz.
Area
USA, Canada and South
1
American countries
2
Other countries
HD-5MD/EN
AUTO
STEREO
L
R
30 10 5
3
1
0 (–dB)
MHz
MD
CHANNEL
Space Frequency
FM: 100 kHz
AM: 10 kHz
FM: 50 kHz
AM: 9 kHz
25
Advertisement
Table of Contents
