Kenwood HD-5MD Instruction Manual page 34

34
To pause recording
Main unit
To pause recording
Main unit
In case of a CD with CD-TEXT recording, the
TEXT data will not be recorded.
In regard to display messages
Recording is not possible when one of the fol-
lowing messages is displayed.
"DISC FULL" : The minidisc is full.
"PROTECTED" : The slider for prevention of er-
"PLAY ONLY" : This is a minidisc only for play-
Remote control
6
MD
Remote control
7
STOP
AUTO/MONO
Delete unwanted titles.
roneous erasure is open.
Close the slider.
back.
Insert a recordable minidisc.
÷ To start recording again, press the MD 6 key.
At this time, the track number will be increased
by "1".
÷ When the CD 6 is pressed during CD record-
ing, the recording and the CD playback can be
paused. Press the CD 6 key again to continue
the recording.
Eject the minidisc after completion of the
recording.
÷ Always eject the minidisc after completion of the
recording.
While "MD WRITING" is displayed, information
is being written to the minidisc, and the unit
should not be subjected to vibrations or shocks.
In regard to the track number at the time of re-
cording
When recording from a CD, the track number is
increased when the track changes.
When recording from external equipment, the
track number automatically is increased by "1"
when the input level again exceeds a specific
level after having dropped for at least 2 sec be-
low this level. In case of classic music, the track
number may be increased by "1"when there are
k
longer passages with very low level. Unneces-
sary track numbers can be deleted later. ("Com-
bining tracks (COMBINE)" Y)
k
÷ In case of tuner recording, the track number auto-
matically increases every 10 minutes. Please edit
as required. ("Dividing tracks (DIVIDE)" R,
"Combining tracks (COMBINE)" Y)
If you want to increment the track number dur-
k
ing a recording, press the TRACK EDIT key on
the remote control during the recording to set a
track number at that position.
The track numbers can be used to find the start
of a track at the time of playback, for program-
ming, etc.
Press during
the recording
HD-5MD/EN
TRACK EDIT