Channel Space Setting - Kenwood NV-500 Instruction Manual

CHANNEL SPACE setting

10
The space between radio channels has been set to the one
that prevails in the area to which the system is shipped.
However, if the current channel space setting does not
match the setting in the area where the system is to be used,
for instance when you move from area 1 or area 2 shown in
the following table or vice versa, proper reception of AM/FM
broadcasts cannot be expected. In this case, change the
channel space setting in accordance with your area by refer-
ring to the following table.
Area
USA, Canada and South
1
American countries
2 Other countries
1 Attach the remote control
unit to the main unit
2 Switching the power ON
3 Select the TUNER input.
4 Press and hold the STOP ( 7 )
key for about 2 seconds.
5 Select the message to be
displayed, "FM 100kHz" or
"FM 50kHz".
CHANNEL
SPACE freq.
FM : 100 kHz
AM : 10 kHz
FM : 50 kHz
AM : 9 kHz
@
STANDBY/TIMER
ON/STANDBY
INPUT
7
SET
CURSOR
(Except for the U.S.A., Canada, U.K., Europe and Australia)
VIDEO1
VIDEO2
TUNER
TAPE
FUNCTION
÷ The setting is remembered even when the power is
switched off.
CURSOR
SET
STOP
TV
CD