Kenwood HD-5MD Instruction Manual page 62

62
6 Press the "TITLE INPUT" key to
finish the edit.
7 After editing has been com-
pleted, press the 0 key to eject
the minidisc.
(Main unit)
Deleting or changing characters
1 Press the 1 or the ¡ key to
move the cursor to the target
character (to be deleted or
changed).
2 Press the "CLEAR/DELETE"
key to delete the character.
In regard to the number of characters which can
be entered
A maximum of 1792 characters, max. 80 per
track, can be entered for the entire MD.
A space requires the same amount of data as a
character.
When deleting a title, do no enter spaces, but
delete the characters (press the "CLEAR/DE-
LETE" key).
TITLE INPUT
1 ¡
TUNING
DOWN UP
CLEAR
/DELETE
When the steps 2 to 5 are repeated before
advancing to step 6, titles (disc title and
track titles ) can be given to the entire disc.
÷ Remove the minidisc after the editing information has been
written to the minidisc with display of "MD WRITING".
While "MD WRITING" is displayed, information
is being written to the minidisc, and the unit
should not be subjected to vibrations or shocks.
÷ When a character is to be inserted without deleting a
character (step {2}), set the cursor to the character
directly following the desired insertion location.
÷ When all characters are to be deleted, this can be
done by pressing the CLEAR/DELETE key repeatedly.
In regard to the key functions
1 or ¡ key:
Shifts the position of the cursor.
CLEAR/DELETE key:
Deletes the character at the cursor position and
advances the characters after this position by one
space. Names can be deleted easily by pressing
the key repeatedly (or by keeping it pressed).
TIME/SPACE key:
Inserts a space.
HD-5MD/EN