Speaker Setting; Switching Display - Kenwood 86120-YZA59 Owner's Manual

General features

Speaker Setting

Fine-tuning so that the System Q value is optimal
when setting the speaker type.
1
Enter Standby
Press the [SRC] button.
Select the "STANDBY" display.
2
Enter Speaker Setting mode
Press the [VOL] knob.
3
Select the Speaker type
Turn the [VOL] knob.
Each time you turn the knob, the setting
alternates between the settings shown in the
table below.
Speaker type Display
OFF "SP OFF"
For 5 & 4 in. speaker "SP 5/4"
For 6 & 6x9 in. speaker "SP 6*9/6"
For the OEM speaker "SP OEM"
4
Exit Speaker Setting mode
Press the [VOL] knob.
10
|
English

Switching Display

Changing the information displayed.
Press the [DISP] button.
Each time the button is pressed, the display
switches as shown below.
In Tuner source
Information
Frequency
Clock
In CD & External disc source
Information
Disc title
Track title
Track number & Play time
Clock
In Audio file source
Information
Song title & Artist name
Album name & Artist name
Folder name
File name
Track number & Play time
Clock
In Standby/ Auxiliary input source
Information
Source name
Clock
• When LX-AMP is connected, the item setup by the
Display mode of LX-AMP is displayed.
• * If the contents of the information cannot be
displayed, Play time or Frequency is displayed.
• When you select the clock display, the display setting
of each source will be changed to the clock display.
• Album name cannot be displayed in WMA file.
Display
"FREQ"
"CLOCK"
Display
"D-TITLE"*
"T-TITLE"*
"P-TIME"
"CLOCK"
Display
"TITLE"*
"ALBUM"*
"FOLDER"
"FILE"
"P-TIME"
"CLOCK"
Display
"SRC NAME"
"CLOCK"