Dell PowerEdge M420 Reference Manual page 352

Parameter Description
Parameter
vlan-range
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode
User Guidelines
The following global parameters are displayed:
Parameter
Source Mac Validation
Destination Mac
Validation
IP Address Validation
The following fields are displayed for each VLAN:
Field
VLAN
Configuration
Log Invalid
ACL Name
Static flag
Example
console#show ip arp inspection vlan 10-12
352
Dynamic ARP Inspection Commands
Description
A valid VLAN range.
Description
If Source Mac validation of ARP frame is enabled.
If Destination Mac validation of ARP Response frame is
enabled.
If IP address validation of ARP frame is enabled.
Description
The VLAN-ID for each displayed row.
Whether DAI is enabled on the VLAN.
Whether logging of invalid ARP packets is enabled on the
VLAN.
ARP ACL Name if configured on the VLAN.
If the ARP ACL is configured static on the VLAN.