Ipv6 Routing - Dell PowerEdge M420 Reference Manual

Command
show ipv6 pimsm interface Displays interface config parameters.
show ipv6 pimsm neighbor Displays IPv6 PIM neighbors learned on the
show ipv6 pimsm rphash
show ipv6 pimsm rp
mapping
a. For the meaning of each Mode abbreviation, see Mode Types on page 77.

IPv6 Routing

Command
clear ipv6 neighbors
clear ipv6 statistics
ipv6 address
ipv6 enable
ipv6 hop-limit
ipv6 host
ipv6 mld last-member-
query-count
Description
routing interfaces.
Displays which rendezvous point (RP) is being
selected for a specified group.
Displays all group-to-RP mappings of which the
router is aware (either configured or learned
from the bootstrap router (BSR).
Description
Clears all entries in the IPv6 neighbor table
or an entry on a specific interface.
Clears IPv6 statistics for all interfaces or for a
specific interface, including loopback and
tunnel interfaces.
Configures an IPv6 address on an interface
(including tunnel and loopback interfaces).
Enables IPv6 routing on an interface
(including tunnel and loopback interfaces)
that has not been configured with an explicit
IPv6 address.
Configures the hop limit used in IPv6 PDUs
originated by the router.
Defines static host name-to- ipv6 address
mapping in the host cache.
Sets the number of listener-specific queries
sent before the router assumes that there are
no local members on the interface.
Mode
PE
PE
IC
IC
GC
GC
IC
(VLAN)
Command Groups
a
Mode
PE
PE
PE
PE
a
123