Basic Operation - Bushnell HOLOsight 510023 Instruction Manual

Congratulations on your choice of a BUSHNELL® HOLOsight®, a revolutionary sighting system
based on advanced holographic technology. The BUSHNELL HOLOsight enhances target
acquisition, improves accuracy, and provides more control over your shooting environment.
The BUSHNELL HOLOsight fills the needs of all shooters from the novice to the most advanced
professional. Our objective is to give each and every customer the quality, commitment, and
service expected from the sighting industry leader. Whatever your shooting discipline, we wish
you the best shooting, and again, we thank you for choosing the BUSHNELL HOLOsight.
Please read the instructions carefully before mounting and using the sight and always practice
proper firearm safety.
Included: Sight assembly, 2 size "N" or "AA" alkaline batteries (depending on model)
You will need a 7/64" Allen wrench.
FIGURE 1
Brightness
Adjustments Switches

BASIC OPERATION

The BUSHNELL HOLOsight uses laser light to illuminate a holographic reticle pattern embedded
in the heads-up display window and forms a virtual image of a reticle pattern. The shooter looks
through the heads-up display window and sees a bright red image of a reticle pattern projected onto
the target plane. There is absolutely no light projected onto the target plane, and the sight is legal to
use in most shooting and hunting situations. The BUSHNELL HOLOsight has no magnification.
BATTERIES
Depending on the model, your Holosight is powered by either (2) N alkaline 1.5 V batteries or
(2) AA batteries. The BUSHNELL HOLOsight is designed to maintain constant brightness at a
particular setting. The reticle brightness will not fade gradually as the batteries run down but rather
shut down abruptly. The first indication of the batteries draining is the reticle blinking when the
unit is turned on. Another indication of low batteries is the reticle pattern blinking off and on
during recoil. With high recoil guns, this can occur before the battery check indicates low battery
condition. If the reticle pattern blinks off and on during recoil or turns off suddenly, replace the
batteries. Alkaline batteries from different manufacturers are not all constructed the same way. Tests
show some brands are more susceptible to degradation by the shock of recoil.
2
2008 Holosight 510023+510023AP 6LIM rev3.indd 4
Holographic
Window
On/Off Switch
Universal Mount
Removable Battery
Compartment
Elevation Adjustment
Windage Adjustment
2/27/2008 11:07:18 AM