Bushnell 53-0021 Instruction Manual
  1. Manuals
  2. Brands
  3. Bushnell Manuals
  4. Riflescope
  5. 53-0021
  6. Instruction manual
Bushnell 53-0021 Instruction Manual

Bushnell 53-0021 Instruction Manual

Riflescope
Hide thumbs
1
2
3
4
5
6
7
8
9
Table of Contents

Advertisement

Quick Links

Model: 53-0021
Instruction Manual
Lit. #: 98-0579/04-05

Advertisement

Table of Contents
loading

Related Manuals for Bushnell 53-0021

Summary of Contents for Bushnell 53-0021

  • Page 1 Model: 53-0021 Instruction Manual Lit. #: 98-0579/04-05...

  • Page 2: Basic Operation

    • 1/8” hex wrench (12 gauge model 1100, 870 or 1187 Remington® or similar) BASIC OPERATION The Bushnell® Holosight® XLP uses a laser to create an illuminated hologram in the display window which appears as a virtual image of a reticle pattern. The reticle pattern appears to the user as a bright red image which is projected onto the target plane.

  • Page 3: Installing Or Replacing Batteries

    FIGURE 1 BATTERIES Two (2) Type AAA alkaline 1.5 V batteries are required to operate the Bushnell® Holosight® XLP. The Bushnell® Holosight® XLP is designed to maintain constant brightness at a particular setting even as the batteries drain through normal use. The reticle brightness will not fade gradually as the batteries drain, but will shut down abruptly.

  • Page 4: Electronic Features

    Pressing and holding the Up or Down push-button switch will change the The Bushnell® Holosight® XLP controls are push-button switches located at the top of the unit as brightness level up or down continuously. There are fifteen (15) brightness settings providing a shown in Figure 1.
  • Page 5 NOTE: Loosen the retaining screw just enough to mount or remove the sight. It is not necessary to remove To mount the sight to a Weaver-style rail, follow these steps, refer to Figure 3: 1. Loosen the 7/64” hex retainer screw that secures the clamp. the screw completely, as the lock hardware will not be retained in the sight and could be lost.
  • Page 6 FIGURE 5 WINDAGE AND ELEVATION ADJUSTMENTS The Bushnell® Holosight® XLP has rotating adjustment features for elevation and windage adjustments. The feature at the back of the sight is the elevation adjustment and the feature at the front side of the sight is the windage adjustment.

  • Page 7: Maintenance And Care

    first remove any dirt and dust with compressed air or by blowing on the glass surfaces. Fingerprints or Your Bushnell® product is warranted to be free of defects in materials and workmanship for two years after the date of purchase. In the event of a defect under this warranty, we will, at our option, repair or replace the product, provided that you return the product lubricants can be wiped off with lens tissue or a soft cotton cloth, moistened with lens cleaning fluid...

  • Page 8: Fcc Compliance

    ENGLISH FCC COMPLIANCE The Bushnell® Holosight® XLP complies with Part 15b of the FCC Rules. Operation is subject to the following conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Page 9 ©2005 Bushnell Performance Optics www.bushnell.com...

This manual is also suitable for:

Holosight xlp 53-0021

Table of Contents