Telephone Settings - AT&T EL52200 Quick Start Manual

Telephone settings

Use Menu structure on page 8 to find and set features. Many are simple yes/no
questions. The following are a few examples of common features to set. Refer to
Handset settings and Answering system settings in the on-line user's manual for
detailed instructions on setting all telephone features.
Ringer volume
Set the ringer volumes individually on each handset and the telephone base.
Handset:
You can set the handset ringer volume level, or turn the ringer off. When the ringer is
off, appears on the handset screen.
. On a handset, use MENU/
and then select >RINGER VOLUME.
2. Press or
DIR
3. Press /SELECT to save your preference.
MENU
NOTE: If the handset ringer volume is set to off, that handset ringer
is silenced for all incoming calls; however, that handset still plays the
paging tone when initiating the handset locator feature.
Telephone base:
When the telephone is not in use, press
telephone base to adjust the ringer volume.
Date and time
The answering system announces the day of the week and time of each message
received prior to playing it. If you subscribe to caller ID service, the day, month and
time are set automatically with each incoming call. However, the year must be set so
that the day of the week can be calculated from the caller ID information.
On a handset, use MENU/
.
>SET DATE/TIME.
2. Use the dial pad keys (0-9) to enter two-digit numbers for the month, day and year.
Press /SELECT.
MENU
3. Use the dial pad keys (0-9) to enter two-digit numbers for the hour and minute.
4. Press or
DIR
SELECT
to sample each volume level.
CID
SELECT
to choose AM or PM. Press
CID
in idle mode. Select >RINGERS
VOLUME on the
in idle mode. Select >SETTINGS and then select
MENU
9
RINGER VOLUME
/SELECT to confirm.