Power Supply Indicators - Dell PowerEdge 4300 Installation And Troubleshooting Manual

Identify drive
Drive being prepared for removal
Drive ready for insertion or removal
Drive being prepared for operation
Drive bay empty
Drive predicted failure
Drive failed
Drive rebuilding
Drive online
The following indicators are on the back of the power supply (see Figure 3-3):
The green indicator is on if the power supply is functioning normally.
The red indicator is on if a fault is detected with the power supply.
Both indicators are off when the handle on the power supply is released.
power supply
indicators (2)
All three drive status indicators blink
simultaneously.
The three drive status indicators flash
sequentially.
All three drive status indicators are off.
The drive online indicator is on. The drive
activity light may flash briefly.
All three drive status indicators are off.
The drive online indicator is on. The drive
failure indicator blinks on briefly each
second.
The drive online indicator turns off. The drive
failure indicator blinks off briefly each
second.
The drive online indicator blinks rapidly.
The drive online indicator is on.
Messages and Codes
power receptacle
handle
3-19