Options - Brother BAS-341F Instruction Manual

16. OPTION
■
Programmer assy
■
Inner clamp device
■
One-touch clamping device
■
Milling device
■
Automatic bobbin changer
■
Snap fastener and hook
attachment device
■
Needle thread presser device
Used to create sewing patterns for the BAS-300E series.
It can also be used to display error messages.
Used for efficient sewing around labels, emblems and tape;
operates by air together with the outer presser, so material
slippages will not occur.
Allows the clamp to be replaced quickly and easily, without the
need for extra tools. The positioning adjustment that has been
previously required for other clamps is no longer necessary.
This device can be used to cut a variety of objects such as
grooves, holes, and outlines shapes in plastic or aluminum
sheets.
When the amount of bobbin thread remaining becomes low, this
device automatically replaces the bobbin. This reduces the need
for tasks such as checking the amount of bobbin thread remaining
and replacing bobbins, so that productivity can be increased.
This attachment is for holding snap fasteners and hooks.
This allows the upper thread to be securely placed under the
material for the first stitch at the sewing start.
BAS-341F, 342F
16. OPTION
58