Using The Floppy Disk - Brother BAS-341F Instruction Manual

6. USING THE OPERATION PANEL

6-2. Using the floppy disk

<Compatible types of floppy disk>
Data type
300E type
(300F type)
Tajima embroidery
data
Old 300A type
Old 300 data
• The above four types of data can all be read, but when writing to disk, all data is automatically converted to 300F,
300E data when writing to 2HD disks and 300A data when writing to 2DD disks.
• When using a 2HD disk, use a disk which has been pre-formatted as a 1.44 MB disk. (The programmer can be used
to format these disks. Refer to the programmer instruction manual for details.)
• TFD embroidery data can be embroidered after it has been converted by the programmer to BAS-300F and BAS-
300E data.
• Restriction on using 2DD floppy disks.
In order to maintain compatibility with the old 300A series, the following restrictions have been placed on the use of
the new functions which have been added to the E series.
Restricted function
Resolution
Low-speed conversion
Split function
during embroidering
Needle down stop for split
Expansion option output
17
No. of stitches
programmed
20,000 stitches per
pattern 100 pattern
Up to a maxi-mum
of 360,000 stitches
50,000 stitches per pattern
4,000 stitches per
pattern 10 patterns
Up to a maximum of
40,000 stitches
2,000 stitches per
pattern 10 patterns
Up to a maximum of
20,000 stitches
A series (2DD)
0.1 mm/pulse
2 types
(400 and 1,200 revolutions)
Not available
Not available
Not available
Data resolution
0.05 mm/pulse
0.1 mm/pulse
0.1 mm/pulse
0.2 mm/pulse
F, E series (2HD)
0.05 mm/pulse
4 types (400, 600, 800and
1,200 revolutions)
Available
Available
Available
BAS-341F,342F
Disk Format
2HD 1.44 MB
Automatically
2DD
formatted
Applicable
command
[668] L
[669] L
[220] L
[230] L
[221] L
[231] L
Write
enabled
Yes
No
Yes
No