Dip Switches Inside The Control Box - Brother BAS-341F Instruction Manual

10. DIP SWITCH

10-2. DIP switches inside the control box

Wait at least 5 minutes after turning off the power switch and disconnecting the power cord from the wall outlet
before opening the face plate of the control box. Touching areas where high voltages are present can result in
severe injury.
■
DIP switch C
C-1 C-2 C-3
- - -
ON - -
- ON -
ON ON -
- - ON
ON - ON
- ON ON
ON ON ON
SW No.
C-4
For pneumatic type, set to ON when the connection has been changed so that the work clamp remains
C-5
C-6
C-7
C-8
43
DANGER
Main circuit board
Model setting
BAS-311E
BAS-326E
BAS-343E
BAS-341F
BAS-342F
BAS-311EL
Controlled sewing area becomes 1200 mm X 400 mm
raised when the power is turned off.
When using an air-driven intermittent work clamp
BAS-341F, 342F
When ON
-
-
1966S