The Signal Menu - Sony VPL CX125 - XGA LCD Projector Operating Instructions Manual

The Signal Menu

The Signal menu is used to adjust the input signal.
Adjust Signal...menu (When the signal is input from a computer)
Adjust Signal
Picture
Aspect:
Signal
Function
Installation
Setup
Information
Setting items
Adjust Signal...
Dot Phase
H Size
Shift
Aspect (When the
video signal is
input)
36
The Signal Menu
Full 1
Sel: Set: Exit:
Functions
Adjusts the dot phase of the LCD panel and the signal
output from a computer.
Adjust the picture further for finer picture after the
picture is adjusted by pressing the APA key.
Adjusts the horizontal size of a picture output from a
computer. Adjust the setting according to the dots of
the input signal.
For details, see page 56.
Adjusts the position of the picture. H adjusts the
horizontal position of the picture.V adjusts the vertical
position of the picture. As the setting for H increases,
the picture moves to the right, and as the setting
decreases, the picture moves to the left.
As the setting for V increases, the picture moves up,
and as the setting decreases, the picture moves down.
b B
Use the or the
v
position and the and
You can set the aspect ratio of the picture to be
displayed for the current input signal. This item is
enabled only when an video signal (preset memory
numbers 1 to 11) is input.
• 4:3 : Select to view a picture with normal 4:3 aspect
ratio.
• 16:9 : Select to view a picture squeezed.
Adjust Signal
Picture
Dot Phase:
H Size:
Signal
Shift:
Function
Installation
Setup
Information
Sel:
key to adjust the horizontal
V
key for the vertical position.
12
1344
H: 235 V: 34
Set: Back: Exit:
Initial setting
Set according to
the input signal
Set according to
the input signal
Set according to
the input signal
Set according to
the input signal