Sony VPL CX125 - XGA LCD Projector Operating Instructions Manual page 41

Setting items Functions
ID Mode Assigns an ID number (1 to 3) to the projector when you
(VPL-CX125/ want control two or more projectors individually with the
CX155 only) supplied Remote Commander. When this item is set to "1,"
you can control the projector with the Remote Commander
with the ID MODE key set to "1." When it is set to "All,"
you can control all the projectors with the Remote
Commander independently of the ID MODE keys of the
Remote Commander.
Direct Power On Set to "On" if you are using a circuit breaker to turn the
power on/off the entire system. You can turn off the power
just by unplugging the power cord without pressing the ?/1
key.
High Altitude Set to "On" when the projector is used at an altitude of
Mode 1,500 m or higher.
Notes
• The auto V Keystone adjustment may not correct the trapezoidal distortion perfectly, depending
on the room temperature or the screen angle.
• If High Altitude Mode is set to "On" at an altitude under 1,500 m, the reliability of the lamp may
be diminished.
Initial setting
All
Off
Off
The Installation Menu
41