Sony VPL CX125 - XGA LCD Projector Operating Instructions Manual page 39

Setting items Functions
Power Saving Selects the Power Saving mode.
• Lamp off: The lamp goes off if no signal is input for
• Standby: The projector goes into Standby mode if
• Off: The projector does not go into Power Saving
Panel Key Lock Locks all the control panel keys on the top of the
projector so that the projector can be operated only
with the Remote Commander.
To lock the control panel keys, set to "On."
When it is set to "On," keeping the ?/1 key on the
control panel pressed for 10 seconds turns the projector
on when it is in standby mode, and turns the projector
to standby mode when the power is on. If you press
and hold the MENU key for about 10 seconds when
the power is on, the lock will be released and "Panel
Key Lock" is automatically set to "Off."
Security Lock Turns on the projector's security lock function.
When set to "On," turns on the security lock function,
which locks the projector once a password has been
set.
For details, see "Security Lock" on page 29.
Notes
• Press the APA key when the full image is displayed on the screen. If the projected image includes
a black portion around it, the APA function will not work properly and some parts of the image
may not be displayed on the screen.
• You can cancel the adjustment by pressing the APA key again while "Adjusting" appears on the
screen.
• The picture may not be adjusted properly depending on the type of input signal.
• Adjust the "Dot Phase," "H Size," and "Shift" items on the Signal menu when you adjust the
picture manually.
• When "Standby mode" is set to "Low", the network presentation and the network control functions
cannot be used.
10 minutes. The lamp lights again when a signal is
input or any key is pressed.
no signal is input for 10 minutes. To use it, turn on
the power again.
mode.
Initial setting
Off
Off
Off
The Function Menu
39