Disabling The Password Function - BenQ W700 User Manual

Disabling the password function

To disable password protection, go back to the SYSTEM SETUP: Advanced > Security
Settings > Power on Lock menu after opening the OSD menu system. Select Off by pressing
/ . The message 'INPUT PASSWORD' displays. Enter the current password.
i. If the password is correct, the OSD menu returns to the Security Settings page
with Off show in the row of Power on Lock. You will not have to enter the
password next time you turn on the projector.
Press
Splash Screen function in the SYSTEM SETUP: Advanced will be available for
your change.
ii. If the password is incorrect, the password error message displays lasting for three
seconds, and the message 'INPUT PASSWORD' displays for your retry. You can
press MENU/EXIT to cancel the change or try another password.
Though the password function is disabled, you need to keep the old password in hand should
you ever need to re-activate the password function by entering the old password.
30 Operation
to highlight Splash Screen Lock and press / to select Off. The