BenQ W700 User Manual page 52

Audio Setting
Lamp
Settings
High Altitude
Mode
Security
Settings
Baud Rate
Test Pattern
Closed
Caption
Reset All
Settings
52 Operation
Mute
Volume
Power On/Off ring tone
See "Adjusting the sound" on page 44
Lamp Mode
See "Setting Lamp mode as Economic" on page 55
Reset lamp timer
See "Resetting the lamp timer" on page 60
Equivalent Lamp Hour
ee "Getting to know the lamp hour" on page 55
S
the total lamp hour is calculated.
A mode for operation in high altitude areas. 
See "Operating in a high altitude environment" on page 43
Change password
You will be asked to enter the current password before changing to a
new one. 
See "Utilizing the password function" on page 28
Change Security Settings
Power On Lock
When Power On Lock is activated, you will be asked to enter the
current password before powering on the projector.
If you enter incorrect password 5 times in succession, the projector
will automatically shut down in a short time.
Splash Screen Lock
When Splash Screen Lock is activated, you will be asked to enter the
current password when attempting to capture a screen.
Selects a baud rate that is identical with your computer's so that you
can connect the projector using a suitable RS-232 cable and update or
download the projector's firmware. This function is intended for
qualified service personnel.
Selecting On enables the function and the projector displays the grid
test pattern. It helps you adjust the image size and focus and check that
the projected image is free from distortion.
Selecting On enables the function. The closed captioning text is
displayed if available.
Close Caption will disable when aspect change to 16:9, 16:10 or
real.
Returns all settings to the factory preset values.
The following settings will still remain: Position, Phase, H. Size,
User 1, User 2, Projector Position, Language, High Altitude
Mode, Security Settings, Baud Rate.
for details.
for details.
for details.
for details on how
for details.
for details.