BenQ W700 User Manual page 12

16. LIGHT
Turns on or off the remote control backlight
for about 10 seconds. Pressing any other key
while the backlight is on keeps the backlight
on for a further 10 seconds.
17. POWER OFF
Turns off the projector. See
the projector" on page 45
18. S-VIDEO
Displays the S-VIDEO source selection. See
"Switching input signal" on page 31
19. PC
Displays the PC source selection. See
input signal" on page 31
20. HDMI 2
Displays the HDMI 2 source selection. See
"Switching input signal" on page 31
Right cursor/Increase volume level 
21.
( / )
: Navigates and changes settings in the
OSD. See
27 for details.
: Increase Volume.
22. Down cursor/Keystone (
: Navigates and changes settings in the
OSD. See
27 for details.
: Manually corrects distorted images
resulting from an angled projection.
See "Correcting keystone" on page 33
for details.
12 Introduction
"Shutting down
for details.
for details.
"Switching
for details.
for details.
"Using the menus" on page
/ )
"Using the menus" on page
23. ASPECT
Select the display aspect ratios. See
"Selecting the aspect ratio" on page 35
details.
24. FREEZE
Freeze/unfreezes the on-screen picture. See
"Freezing the image" on page 43
25. AUTO
Automatically determines the best picture
timings for the displayed image.
26. CONTRAST
Displays the CONTRAST setting bar. See
"Adjusting Contrast" on page 38
27. SHARP
Displays the SHARPNESS setting bar. See
"Adjusting Sharpness" on page 39
details.
28. BLANK
Hides the screen picture. See
image" on page 41
29. TINT
Displays the TINT setting bar. See
"Adjusting Tint" on page 39
30. TEST
Displays the test pattern.
for
for details.
for details.
for
"Hiding the
for details.
for details.