Setup Utilities - Oki B4300 User Manual

Printing the Network Interface Card Configuration Sheet
The printer's configuration page reports information that is required for
NetWare configuration. To print a configuration page, while the printer is
switched on, depress the NIC's push-button for three seconds and then
release.
The Ethernet address (MAC Address) of the printer can be found on the
self-diagnostic printout, which can be printed by pressing the push-button
on the network card for two seconds and then releasing it.
The first six digits of the Ethernet address are the same for all OkiLan
print servers. The last six digits of the Ethernet address are unique to each
card
This is all the information that is required to setup the OkiLan for
NetWare.

Setup Utilities

Use NWAdmin32 or the Pconsole utility to create and setup NetWare
printer objects. Please refer to Novell documentation for instructions on
how to achieve this.
Use the OKI Network Card Setup Utility (Quick Setup) or other printer
manager software, (AdminManager, Web browser, etc.) to configure the
network interface card. For instructions please refer to the Configuration
Novell NetWare 89