Netware Tab - Oki B4300 User Manual

To find corresponding items in WEB and TELNET, see the equivalent in
the Configurable Items and Default Values table that starts on page 46.

Netware Tab

This is where you can configure NetWare related items.
Location
Use NetWare Protocol
Print Server Name
Frame Type
Operation Mode
Check box besides Bindery
Setup
Bindery Setup
Comments
Set NetWare protocol as enabled/disabled.
Set Print Server name.
Set primary NetWare frame type.
Set NetWare mode.
Check if you want to use the Bindery mode and Bindery
Setup button becomes available. If it is unchecked, the button
is greyed out.
Configure items related to Bindery mode.
In this dialogue box, the following items can be configured.
Available File Server and
Selected File Server.
Password.
Job Polling Time.
Configuration 26
Select file servers to connect.
Up to eight file servers can be
selected. Select a server from
Available file server list and
click >>. The server is copied
to Selected file server box.
Set password for Print Server.
Set print job polling interval
in seconds.