Windows 2000
1.
Click the [Start] button, select [Settings] and then click [Network
and Dial-up Connections].
2.
Double-click the [Local Area Connection] icon. In the [Local Area
Connection Status] dialogue box, click [Properties].
3.
In the [Local Area Connection Properties] dialogue box, if the
[NetBEUI Protocol] is not listed, click [Install].
4.
In the [Select Network Component Type] dialogue box, select
[Protocol] and click [Add].
5.
In the [Select Network Protocol] dialogue box, select [NetBEUI
Protocol] and click [OK].
6.
Click [Close] in the [Local Area Connection Properties] dialogue
box.
7.
Click the [Close] button in the [Local Area Connection Status] dialogue
box.
Windows XP
Although you can install the NetBEUI protocol into Windows XP, it is not
supported. You should be able to use NetBEUI on LAN connections
although you will not be able to use this on Remote Access Service
Connections.
1.
In the [Start] menu, select [Settings] then [Control Panel].
2.
Double-click [Network Connections].
3.
Right-click the adapter you wish to add NetBEUI to and then click
[Properties].
4.
On the [General] tab, select [Install].
5.
Select [Protocol] and then [Add].
Microsoft Windows 85