Oki B4300 User Manual page 49

Ref. No. Admin
Manager
TCPIP-9 [OKI Device
Setup]-
[General]-
[Change root
password]
SNMP-1 [OKI Device
Setup]-
[SNMP]-
[Authentic
Community]
SNMP-2 [OKI Device
Setup]-
[SNMP]-
[TRAP
Community]
SNMP-3 [OKI Device
Setup]-
[SNMP]-
[TRAP
Address]
SNMP-4 [OKI Device
Setup]-
[SNMP]-
[SysContact]
SNMP-5 [OKI Device
Setup]-
[SNMP]-
[SysName]
Web browser TELNET/
Diagnostic test
print
[Setup TCP/IP]-
[root password]
[Network [Setup SNMP]-
Configuration]- [Authentic
[SNMP Traps]- community]
[MIB-II
Information]-
[Authentic
Community]
[Network [Setup SNMP]-
Configuration]- [Trap community]
[SNMP Traps]-
[MIB-II
Information]-
[Trap Community]
[Network [Setup SNMP]-
Configuration]- [Trap address]
[SNMP Traps]-
[MIB-II
Information]-
[Trap IP Address]
[Network [Setup SNMP]-
Configuration]- [SysContact]
[General Settings]-
[System
Information]-[System
Contact]
[Network [Setup SNMP]-
Configuration]- [SysName]
[General Settings]-
[System
Information]-
[System Name]
Configuration 47
Available Notes
options
Any Set the root
alphanumeric password of
characters up OkiLAN
to seven
characters.
(Default is null)
Any This
alphanumeric community
characters up to name is used to
15 characters. check whether
(Default is incoming
[public]) SNMP
requests have
the correct
community
name or not.
The
community
name is
displayed as
****** for
security
reasons
Any This
alphanumeric community
characters up to name is
15 characters. assigned to
(Default is outgoing
[public]) system traps
such as cold
start, authenti-
cation failure,
etc.
0.0.0.0— Set a
255.255.255.255 destination IP
(0.0.0.0) address of
Trap packet. If
0.0.0.0 is set,
Trap is
disabled
Any Set SysContact
alphanumeric (printer
characters up to manager)
255 characters. name
(Default is null)
Any Set SysName
alphanumeric (printer model
characters up to name)
255 characters.
(Default is null)