Oki B4300 User Manual page 76

Do you use the TCP/IP protocol?
When using lpr in UNIX and other TCP/IP environments, please
select [Yes]. To use in a TCP/IP environment, an IP address should
be assigned to the Ethernet board.
If [Yes] has been selected and TCP/IP is the only working protocol
and the IP address has not already been assigned, you can either
obtain an IP address automatically or assign an IP address.
When [Obtain an IP address automatically] is selected, the device IP
address will be automatically assigned by the DHCP server. In an
environment without a DHCP server, please assign the IP address
manually.
If you are assigning an IP address, you need to enter:
>An IP address
>Submit mask
>Gateway address.
9. Click [Next].
Do you use the NetWare protocol?
Consult your network manager to ensure that the NetWare file server
is properly installed and working on the network. Make sure that
NetWare Client32 or IntranetWare Client is installed on your
computer.
10. On selecting [Yes] you will be asked if [You set-up the queue from
the Wizard]?
Do you use the EtherTalk protocol?
EtherTalk is the required protocol for printing data from the
Macintosh environment.
Do you use the NetBEUI protocol?
Using NetBEUI makes it easy to manage your OKI product and print
within the network environment of Windows.
Microsoft Windows 74