Oki B4300 User Manual page 32

Location Comments
Printer Trap Setup By selecting the button, the following dialogue box is displayed:
. . .
In the dialogue box, the following items can be configured:
Printer Trap
Community Name
TCP#1—5
Detail . . .
This community name is assigned to outgoing
printer status traps such as off-line, paper out, etc.
Set the IP address to which a Trap packet will be
sent. You can set up to five IP addresses.
By selecting the button, the following dialogue
box is displayed:
In the dialogue box, the following items can be
configured:
Trap Enable
On-Line
On-Line
Paper Out
Paper Jam
Configuration 30
Set sending a Trap
packet, enabled or
disabled, for each
destination.
Set sending a Trap,
enabled or disabled,
when the printer turns to
On-Line.
Set sending a Trap,
enabled or disabled,
when the printer turns to
Off-Line.
Set sending a Trap,
enabled or disabled,
when paper is out.
Set sending a Trap,
enabled or disabled,
when paper is out.