Labels - Konica Minolta magicolor 4750EN/4750DN User Manual

Too rough of a surface
Material that will melt, vaporize, offset, discolor, or emit dangerous fumes
Been presealed

Labels

A sheet of labels consists of a face sheet (the printing surface), adhesive, and
a carrier sheet:
The face sheet must follow the plain paper specification.
The face sheet surface must cover the entire carrier sheet, and no adhe-
sive should come through on the surface.
You can print continuously with label sheets. However, this could affect the
media feed, depending on the media quality and printing environment. If
problems occur, stop the continuous printing and print one sheet at a time.
Check your application documentation for more information on printing labels.
Capacity
Orientation Tray 1
Driver
Media Type
Duplexing
Use label sheets that are
Recommended for laser printers
DO NOT use label sheets that
Have labels that easily peel off or have parts of the label already removed
Have backing sheets that have peeled away or have exposed adhesive
Media Types
Tray 1 (Man-
ual Feed
Tray)
Tray 2
Tray 3
(Manual Feed
Tray)
Tray 2
Label
Not supported
Labels may stick to the fuser, causing them to peel off and media
misfeeds to occur.
Up to 20 label sheets, depending on their
thickness
Not supported
Face down
Face up
6-7