8
Reconnect the power cord, and
turn on the printer.
9
Use
DATE
and use
time.
Replacing the Fuser Unit FU-P02
When the time to replace the fuser unit is reached, the message
UNIT/END OF LIFE
sage appears; however, since the print quality is reduced, the fuser unit
should be replaced immediately
1
Turn off the printer.
Note
There are extremely hot parts within the machine. Before replacing the
fuser unit, wait about 20 minutes after turning off the machine, and then
check that the fusing section has reached room temperature, otherwise,
you may get burnt.
Replacing Consumables
on the
SYS DEFAULT MENU/CLOCK
on the
TIME
SYS DEFAULT MENU/CLOCK
appears. Printing can continue even after this mes-
menu to set the date,
menu to set the
FUSER
7-35