Removing All Toner Cartridges - Konica Minolta magicolor 1600W User Manual

Removing All Toner Cartridges

Note
Be careful not to spill toner while replacing a toner cartridge. If toner
spills, immediately wipe it off with a soft, dry cloth.
By using the Eject All Toner mode, all toner cartridges can be removed.
Follow the procedure described below to use the Eject All Toner mode.
1
Use either operation described below to switch the printer to Eject All
Toner mode.
Hold down the Rotate Toner key for more than 10 seconds.
On the Panel tab of the Remote Panel Utility, select Eject All Toner,
and then click the Rotate Toner button.
2
Open the front cover.
Replacing Consumables
The printer enters Eject All Toner mode, and the magenta toner
indicator lights up.
To exit Eject All Toner mode, press the Clear key.
Before opening the front
cover, open Tray 1 if it is
not already open.
5-11