User Service Tab - Konica Minolta magicolor 1600W User Manual

Auto Continue—If Off is selected, the next print job will not be per-
formed if a paper size error occurred in the printer, unless the Clear
key is pressed to cancel the error.
If On is selected, the next print job is sent if a paper size error
occurred in the printer, the error is automatically cancelled, and the
next print job is performed.
Calibration
Start—Performs the calibration operation.

User Service Tab

When the Remote Panel Utility is started up again after is has been
exited using the icon in the Windows notification area (right end of the
taskbar), the default settings will be displayed. Click the Display Con-
figuration Page button to view the actual settings, or click the Down-
load button to download the settings from the printer.
Top Adjustment—Allows the vertical print position to be finely adjusted.
Left Adjustment—Allows the horizontal printer position to be finely adjusted.
Transfer Power—Adjust the 2nd transfer voltage for each media type. If there
are cracks in solid parts of the image, move the setting in the + direction.
If small white dots appear in halftones, move the setting in the - direction.
Service's Choice
GDI Timeout—Specifies the amount of time until communication with
the printer times out.
Energy Save—Specifies whether or not the Energy Save mode is
enabled. The length of time until the machine enters Energy Save
mode can be specified from the Panel tab.
Flicker—Select a mode for preventing flickering of the fluorescent lamp,
depending on the power source.
0: Prevents flickering automatically
1: Normally prevents flickering
2: Does not prevent flickering
3-4
The calibration function consumes toner.
Adjusting the position a single increment moves it 0.0079 inch (0.2
mm).
Adjusting the position a single increment moves it 0.0079 inch (0.2
mm).
This menu is displayed only on the Americas model.
Working with the Remote Panel Utility