Konica Minolta magicolor 1600W User Manual page 113

Symptom
The print or
color density
is uneven.
Irregular
print or mot-
tled image
appears.
There is
insufficient
fusing or the
image
comes off
when
rubbed.
7-26
Cause
One or more of the
toner cartridges may
be defective or low.
The imaging cartridge
is defective.
The printer is not
level.
The media is moist
from humidity.
Unsupported media
(wrong size, thick-
ness, type, etc.) is
being used.
One or more of the
toner cartridges may
be defective.
The imaging cartridge
is defective.
The media is moist
from humidity.
Unsupported media
(wrong size, thick-
ness, type, etc.) is
being used.
Media type is set
incorrectly.
Solving Problems with Printing Quality
Solution
Remove the toner cartridges and
check for damage. If it is damaged,
replace it.
Remove the imaging cartridge and
check for damage. If it is damaged,
replace it.
Place the printer on a flat, hard, level
surface.
Adjust the humidity in the media stor-
age area.
Remove the moist media and replace it
with new, dry media.
Use KONICA MINOLTA-approved
media. See "Print Media" on page 4-2.
Also, refer to http://printer. konicami-
nolta.com for a complete list of cur-
rently approved media.
Remove the toner cartridges and
check for damage. If it is damaged,
replace it.
Remove the imaging cartridge and
check for damage. If it is damaged,
replace it.
Remove the moist media and replace it
with new, dry media.
Use KONICA MINOLTA-approved
media. See "Print Media" on page 4-2.
Also, refer to http://printer. konicami-
nolta.com for a complete list of cur-
rently approved media.
When printing envelopes, labels, post-
cards, thick stock, or letterheads, spec-
ify the appropriate media type in the
printer driver.