Choosing Restraint And Position; Preparing Child Restraint To Fit Your Child - DJG Enspira Instruction Manual

4358-3432E Enspira 5pt 8/6/07

Choosing Restraint and Position

Your child's height, weight and age determine how your
child restraint should be placed in the vehicle and which
restraint should be used.
10
4:46 PM Page 13
5-35 lbs (2.3-16 kg)
19-36 in. (48-91 cm)
Rear-Facing using
5-point harness
Child and child restraint
face the back of the vehicle
and are placed in the back
seat.
22-40 lbs (10.1-18 kg)
34-43 in. (85.1-110 cm)
and Over 1 Year Old
Forward-Facing using
5-point harness
Child and child restraint
face the front of the vehicle
and are placed in the back
seat.
40-80 lbs (18.1-36.3 kg)
43-52 in. (110.1-132.1 cm)
and Over 1 Year Old
Belt-Positioning Booster
using vehicle
lap/shoulder belt
combination
Child and child restraint
face the front of the vehicle
and are placed in the back
seat. 5-point harness is
removed.
Preparing Child Restraint to Fit
Your Child
You MUST make these adjustments with your
child before you install the child restraint in the
vehicle.
Make sure LATCH belt
1
packaging is pulled free of
child restraint shell.
Install Cup Holder (on
2
select models): Pull pad
off corner and place cup
holder on shell. Make
certain cup holder snaps
Loosen harness by pushing
3
down on the harness
release lever while pulling
out on the harness.
Depending on your model,
11
Lo
do
rel
ou
into place. Replace
pad. Cup holder
can be on either
side.
the harness
release lever
may be under a
flap on the pad
in the front of
restraint.
continued on next page.