Advertisement
ATTENTION
The 'POI Select' is operable only when the Area Shot mode is activated and the Route Assist is
selected.
Displaying POI information
1 1
Press the button [1] to [5] to display the corresponding POI information, when the
POI icons are displayed on the map.
The POI information displayed consists of :
• Name/name of business
• Telephone number
• ZIP code
• Address
When the page up/page down mark (
button to switch to the previous/next page.
Press the button [6] or the [RTN] button to return to the map screen.
Guidance List screen
In Guidance List view, the user can view a list of street names, guidance directions and distances
to guidance point for the next 3 Guidance Points from current location.
Using the following controls, the user can switch back and forth between map view and list view
during route guidance.
1 1
Press the [ENTER] button while Area Shot mode is activated.
This switches the display from map view to list view.
Press the [ENTER] button again to switch back to map display.
ATTENTION
• When using an optional GPS unit, and GPS reception fails (when entering a tunnel for example)
during route guidance, the display will automatically switch from map view to list view. In this
case, pressing the [ENTER] button will not switch the display back to map view until GPS
reception has been restored.
• When reception is restored, the display will automatically change from list view to map view.
/
) is displayed, press [SELECT] (Upper/Lower)
Advertisement
