Fan Monitoring; Chassis Intrusion And Detection; Power Management; Acpi - Intel BLKD865GBF Specification

Intel Desktop Board D865GBF/D865GLC Technical Product Specification

1.12.3 Fan Monitoring

Fan monitoring can be implemented using Intel
party software. The level of monitoring and control is dependent on the hardware monitoring
ASIC used with the Desktop Board.
For information about
The functions of the fan connectors

1.12.4 Chassis Intrusion and Detection

The Desktop Boards D865GBF and D865GLC support a chassis security feature that detects if the
chassis cover is removed. The security feature uses a mechanical switch on the chassis that
attaches to the chassis intrusion connector. When the chassis cover is removed, the mechanical
switch is in the closed position.

1.13 Power Management

Power management is implemented at several levels, including:
Software support through Advanced Configuration and Power Interface (ACPI)
Hardware support:
Power connector
Fan connectors
LAN wake capabilities
Instantly Available PC technology
Resume on Ring
Wake from USB
Wake from PS/2 devices
Power Management Event signal (PME#) wake-up support

1.13.1 ACPI

ACPI gives the operating system direct control over the power management and Plug and Play
functions of a computer. The use of ACPI with the Desktop Boards D865GBF and D865GLC
requires an operating system that provides full ACPI support. ACPI features include:
Plug and Play (including bus and device enumeration)
Power management control of individual devices, add-in boards (some add-in boards may
require an ACPI-aware driver), video displays, and hard disk drives
Methods for achieving less than 15-watt system operation in the power-on/standby
sleeping state
A Soft-off feature that enables the operating system to power-off the computer
Support for multiple wake-up events (see Table 17 on page 52)
Support for a front panel power and sleep mode switch
50
®
Active Monitor, LANDesk* software, or third-
Refer to
Section 1.13.2.2, page 54