Intel BLKD865GBF Specification page 113

Table 60. Peripheral Configuration Submenu (continued)
Feature
Parallel port
Mode
Base I/O address
(This feature is present
only when Parallel Port
is set to Enabled)
Interrupt
(This feature is present
only when Parallel Port
is set to Enabled)
DMA
(This feature is present
only when Parallel Port
Mode is set to ECP)
Audio
Onboard LAN
Options Description
Disabled Configures the parallel port.
Enabled Auto assigns LPT1 the address 378h and the interrupt IRQ7.
Auto (default) An * (asterisk) displayed next to an address indicates a
conflict with another device.
Output Only Selects the mode for the parallel port. Not available if the
parallel port is disabled.
Bi-directional
(default) Output Only operates in AT*-compatible mode.
EPP
Bi-directional operates in PS/2-compatible mode.
ECP EPP is Extended Parallel Port mode, a high-speed
bi-directional mode.
ECP is Enhanced Capabilities Port mode, a high-speed
bi-directional mode.
378 (default) Specifies the base I/O address for the parallel port.
278
IRQ 5 Specifies the interrupt for the parallel port.
IRQ 7
(default)
1 Specifies the DMA channel.
3 (default)
Enabled Enables or disables the onboard audio subsystem.
(default)
Disabled
Enabled Enables or disables the onboard LAN device.
(default)
Disabled
BIOS Setup Program
113