Storage - Echo HCA-2400 Operator's Manual

Shaft hedge clipper
Hide thumbs Also See for HCA-2400:
Table of Contents

Advertisement

S
TORAGE
Long Term Storage (over 30 days)
Do not store your unit for a prolonged period of time (30 days or longer)
without performing protective storage maintenance which includes the
following:
1.
Store unit in a dry, dust free place, out of the reach of children.
WARNING
Do not store in enclosure where fuel fumes may accumulate or
reach an open flame or spark or serious personal injury may result.
2.
Place the stop switch in the "OFF" position.
3.
Remove accumulation of grease, oil, dirt and debris from exterior of
unit.
4.
Perform all periodic lubrication and services that are required.
5.
Tighten all the screws and nuts.
6.
Drain the fuel tank completely and pull the recoil starter handle
several times to remove fuel from the carburetor.
7.
Remove the spark plug and pour 7 cc (1/4 oz.; 1/2 tablespoon) of
fresh, clean, two-stroke engine oil into the cylinder through the
spark plug hole.
A.
Place a clean cloth over the spark plug hole.
B.
Pull the recoil starter handle 2-3 times to distribute the oil
inside the engine.
C.
Observe the piston location through the spark plug hole. Pull
the recoil starter handle slowly until the piston reaches the
top of its travel and leave it there.
8.
Install the spark plug (do not connect spark plug cable).
IMPORTANT
Always store and transport Shaft Hedge Clipper in a stable,
horizontal position. Support gear case and cutting blades to prevent
excessive flexing, which may cause damage to the cutting attach-
ment.
DANGER
H
C
EDGE
O
'
M
PERATOR
S
LIPPER
33
ANUAL

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents