International Symbols; Equipment - Echo HCA-2400 Operator's Manual

INTERNATIONAL SYMBOLS

Symbol
Symbol form/shape
description/application
Read and understand
Operator's Manual.
Wear eyes, ears and
head protection
Hot
Surface
Safety/Alert
Avoid all power lines.
This unit is not insulat-
ed against electrical
current.

EQUIPMENT

Before operation a complete check of the unit must be performed;
• Check unit for loose/missing nuts, bolts and screws. Tighten
and/or replace as needed.
• Inspect fuel lines, tank and area around carburetor for fuel leaks. DO
NOT operate unit if leaks are found.
• Inspect hand guard for damage. Replace if damaged or missing.
• Check that the blade assembly is firmly attached and in safe operating
condition. Dull, loose or damaged blades should not be used.
• Check that front loop handle and shoulder strap/ or shoulder/
waist harness are adjusted for safe, comfortable operation.
• Tighten the blade angle adjustment lever before operating the
HCA-2400.
IMPORTANT
Always store and transport Shaft Hedge Clipper in a stable,
horizontal position. Support gear case and cutting blades to prevent
excessive flexing, which may cause damage to the cutting attach-
ment.
Symbol form/shape Symbol
description/application
Fuel and oil mixture
Finger Severing
Wear hand
protection. Use
two handed.
DO NOT smoke
near fuel.
DO NOT allow
flames or sparks
near fuel.
Do not operate clos-
er than 15 M (50 ft.)
from electrical
hazards.
H
EDGE
O
PERATOR
Symbol
Symbol form/shape
description/application
Keep bystanders at
least 15 meters
(50 feet) away.
Emergency stop
Engine choke
control.
Primer bulb
Carburetor adjustment
- Low speed mixture
C
LIPPER
' M
S ANUAL
Symbol form/shape Symbol
description/application
Plan retreat path
from falling
objects.
Wear slip resistant
foot wear.
Ignition
ON/OFF
Carburetor adjustment
- High speed mixture
Carburetor adjustment
- Idle speed
5